Reasons For Too High Oil Temperature Of Backhoe Loader
If the oil temperature is too high in the process of using the backhoe loader, it will cause problems in the backhoe loader. In order to avoid these factors, everyone should pay attention to the following matters when actually operating the backhoe loader:
亚博yabovip88 1. Keep the oil quantity in the loader oil tank normal so that there is enough oil in the system for circulating cooling.
2. When the actuator of the backhoe loader亚博yabovip88 does not work, the system should be unloaded in time.
3. Always clean the cooling device of the backhoe loader to keep it in good working condition.
4. The hydraulic oil should be reasonably selected according to the working environment temperature of the backhoe loader亚博yabovip88. The high viscosity oil should be selected when the environment temperature is high, and the low viscosity oil should be selected when the environment temperature is low.
5. When the working environment temperature of the backhoe loader is higher than 30 ℃, the continuous operation time of the bucket loader can not exceed 4 hours.
6. When the working environment temperature of the backhoe loader is lower than 10 ℃, the system should run under no-load condition for 20 minutes, and then work after the oil temperature rises to the specified value.
亚博yabovip88 is mainly engaged in underground loaders, telescopic arm loaders, four-wheel drive forklifts, excavators, mixing buckets, mixing bucket loaders, sliding loaders, electric loaders, mine loaders, cross-country forklifts, forklifts, etc. Shandong China Transport is an international engineering machinery enterprise and a new technology enterprise. The company's main products are loaders, excavators, forklifts, mixers, road machinery and accessories with a series of engineering machinery products, independent research and development of new mixing bucket, once launched, won the praise of customers at home and abroad. The company has advanced process equipment, testing equipment and perfect management system, to ensure the performance and quality of products, customer satisfaction. If you have related equipment requirements, please contact us.