亚博yabovip88

Shandong China Transport Logistics Equipment Group
Shandong China Transport Logistics Equipment Group

Good China Registered Mark China Transport zhufeng zhuitao zhuiyun dazhongyun

+86-537-2350961

sales@chinacoalintl.com

News Detail

How To Maintain Cement Plaster Spraying Machine

Time: 2019-05-31 Category: Industry Information Tag: Cement Plaster Spraying Machine
Summary: Before any maintenance operations, the pressure must be removed and the balloon valve closed.The details methods of Maintain Cement Plaster Spraying Machine are as follows:

亚博yabovip88 Before any maintenance operations, the pressure must be removed and the balloon valve closed.


亚博yabovip88 1. According to the viscosity of the paint and the thickness of the particles, select the appropriate filter filter screen. After used cement plaster spraying machine, the dirt on the filter should be removed in time, and the damaged filter should be replaced in time.


2. When diluting the paint or cleaning equipment, the solvent specified by the paint should be used to prevent the paint from abnormally depositing or agglomerating, blocking the passage of the paint filter, high pressure valve port, high pressure pipeline and spray gun, and it is impossible to spray. In particular, when diluting the coating, it must be strictly in accordance with the technical requirements of the coating to avoid affecting the performance of the coating.


亚博yabovip88 3. The two major components of the cylinder and gas distribution system should not be scrubbed with strong organic solvents, and should not be immersed in strong solvents. All rubber seals in the equipment can only be cleaned with gasoline or non-solvent cleaners.


亚博yabovip88 4. Cylinders, gas distribution systems, upper and lower pilot valves, oil misters, pressure regulators and other pneumatic components. Do not enter rust, sand, dust, etc. during assembly after cleaning and maintenance. The foreign matter on the air intake filter should be cleaned regularly to prevent the intake air from decreasing and affecting the cement plaster spraying machine pressure.


亚博yabovip88 5. After used cement plaster spraying machine, the spraying machine should be cleaned in time. Otherwise, curing the agglomerated coating will aggravate the wear of the paint cylinder, piston rod, seal ring and other parts, and shorten the service life of the cement plaster spraying machine.


亚博yabovip88 6. If you need to replace all the important parts such as seals (rubber or Teflon), paint cylinder, piston rod, paint hydraulic system pressure parts, spring, air motor and gas distribution system during maintenance, please choose genuine Original accessory products to ensure the normal operation of the cement plaster spraying machine.